• Very high-speed broadband subscriber access over optical fibre
  • Neutral access to all the services of all the operators present on the territory
  • Gigabit Ethernet managed switch 5 ports including 1 optical port
  • Equipped with a 1000Base-BX SFP module, 100Base-BX compatible
  • Patchcord
  • Design housing

Description

The CPEFibre Ethernet module includes 1000Base-BX optical fibre access and 4 10/100/1000Base-TX ports, It allows to connect 1 to 4 IP equipment to an Ethernet network, via 1 single mode fibre up to 20 km.

Two configurations are available, either activated copper ports or desactivated copper ports for full control over the fibre optic network for client access.

The CPEFibre offers FTTx multiservice and multi-operator accesses. It is remotely configurable via its optical port. Each port can be separately controlled using layer 2 Ethernet functions (VLANs).

The CPEFibre are delivered with a 230 VAC / 12VDC power converter.

Modular conception

The CPEFibre IFOTEC has got a modular design. It can be put on a flat surface or hung / fixed vertically.

It is composed of three independent parts:

  • The plinth to connect a cable with two optical fibres (fibre coiling)
  • The network activation card (Ethernet switch)
  • The translucent cover providing the operating indications of the module
Top of the page

Management

Software Features

Strictly Layer 2 operation.

  • Management of 32 VLANs according to 802.1Q standards.
  • Traffic limiting mechanism to set input/output rates on client ports.
  • QoS management: 4 queues on all ports; traffic classification by port or VLAN or DSCP/802.1p field.
  • Port mirroring.
  • Energy Efficiency Ethernet management (802.3az).
  • Configurable L2 MTU 2048 or 10240 bytes (MAC addresses + VLAN tags + data + FCS).
  • Automatic configuration loading via TFTP. At start-up via DHCP options.
  • Login/password management of the supervision interface via RADIUS authentication
    Firmware update can be triggered via DHCP options.
  • Configuration file” management (Telnet command lines in text format) via Telnet and web page.
  • Telnet productivity features (auto-completion of commands, display filtering, etc.).
  • 802.1Q and 802.1ad (QinQ) VLAN stacking management with priority management (802.1p fields): the value of the 802.1p field (priority level) of the VLAN tag of the incoming frame is duplicated to the 802.1p field of the inserted VLAN tag (outer-tag).
  • IGMP snooping V1/V2 per VLAN.
  • Product configuration via Telnet and web pages. SNMP monitoring and alarm management functions (port status, MAC address table, throughput and error counters, etc.).
  • Translated with www.DeepL.com/Translator (free version)
Top of the page

Downloads

Fiche technique

Version française

Solution FTTO pour ZAC

Solution très haut débit pour mutualiser l'accès fibre sur les ZAC

Datasheet

English version - Please consult us

Product and accesory references

Product references
Reference Version Optical connector Network access Qt.
CPEFibre-G4G-120 Activated copper ports 1 x SFP /1 OF (BX-U) - LC/PC Without fibre patchcord
CPEFibre-G4G-12_ Activated copper ports 1 x SFP /1 OF (BX-U) - LC/PC SC/PC or SC/APC patchcord to be specified
CPEFibre-G4G-220 Deactivated copper ports 1 x SFP cage with optical module /1 OF (BX-U) - LC/PC Without fibre patch cord
CPEFibre-G4G-22_ Deactivated copper ports 1 x SFP /1 OF (BX-U) - LC/PC SC/PC or SC/APC jumper to be specified
Add to my quotations

Associated products and pages

Back